The JWST ETC incorporates the JWST backgrounds in the calculation of signal to noise for a specified exposure time. JWST backgrounds vary with position on the sky and time of the year. The user may use a dated or dateless background option for a given celestial position.
Backgrounds in the JWST Exposure Time Calculator (ETC) are obtained using the Backgrounds Model Generator (BMG), and account for the various. This includes the in-field components from the zodiacal cloud and the Milky Way, out-of-field stray light, and thermal self-emission from the telescope (dominates the background at wavelengths >15 μm). that contribute to the JWST background
The JWST ETC calculates backgrounds for a given celestial position. The J2000 RA and Dec for the position in the sky can be provided in the following formats: "hh mm ss.s ±dd mm ss.s" or "hh:mm:ss.s ±dd:mm:ss"
If the user specifies a date, the ETC will give the best estimate for the background on that date for the given celestial position. Alternatively, the user can choose a low background (10th percentile), a medium background (50th percentile), or high background (90th percentile), all calculated for the selected celestial position over the period of visibility. Figure 1 shows the options in the Backgrounds tab in the ETC. When the dated background is chosen, the ETC will give an error if the specified celestial position is not observable on the selected date. Users are advised to use the to determine the dates when the specified celestial position is observable.
JWST ETC Reports provide the Input Background Surface Brightness (in MJy/steradian), as well as the Total Background Flux in Extraction Aperture and Total Sky Background Flux in Extraction Aperture (both in units of e–/s). The Total Sky Background Flux in Extraction Aperture can also be seen graphically in the ApBackground tab in the Plots pane (see JWST ETC Images and Plots). The computed background spectrum can be downloaded as a FITS table as described in the JWST ETC Downloads article.
The JWST ETC can be used to check whether the observations will be background limited, and whether background-limited special requirement should be specified in the APT. The procedure to determine whether the observations are background-limited is described in the article on Background-Limited JWST Observations.
The default background position is RA=00:00:00.00, Dec=00:00:00.0. A list of other potentially useful positions are included in Table 1. This table also includes visibility windows (valid for ETC v1.3) for each of the positions in 2020 to avoid receiving an error message in the ETC. These dates depend on the exact orbit of JWST about L2 and so are subject to change once on-orbit. Users are advised to use theto determine the dates when a specified celestial position is observable.
Table 1. List of background positions