Medium-resolution spectroscopy, an observing mode for JWST's Mid-Infrared Instrument (MIRI), will obtain spatially resolved spectroscopic data between 4.9 and 28.8 μm over a FOV up to 7.2" × 7.9".
The JWST MIRI medium-resolution spectrometer (MRS) (Wells et al. 2015) will observe simultaneous spatial and spectral information between 4.9 and 28.8 μm over a contiguous field of view up to 7.2" × 7.9" in size. This is the only JWST configuration offering medium-resolution spectroscopy (with R from 1,500 to 3,500) longward of 5.2 μm.
MRS observations are carried out using a set of four integral field units (IFUs), each of which covers a different portion of the MIRI wavelength range. MRS IFUs split the field of view into spatial slices, each of which produces a separate dispersed "long-slit" spectrum. Post-processing produces a composite three-dimensional (two spatial and one spectral dimension) data cube combining the information from each of these spatial slices. This process is illustrated schematically in Figure 1.
MRS operations have been designed to allow for efficient observations of point sources, compact sources, and fully extended sources. The observer will have control over three primary variables: (1) wavelength coverage, (2) dithering pattern, and (3) detector read out mode and exposure time (via the number of frames and integrations).
MRS wavelength coverage
The MRS has four separate IFUs (channels 1 through 4), each covering a separate wavelength range between 4.9 and 28.8 μm. All four channels are observed simultaneously, but each exposure can only cover one-third of the available wavelength range in a single configuration. For complete spectral coverage, three different spectral settings must be observed; SHORT (A), MEDIUM (B), and LONG (C). Therefore, there are 12 different wavelength bands, increasing in wavelength from "1A" to "4C." These settings are summarized in Table 1 and Figure 2.
The spectral resolving power changes between each MRS band, and also varies spatially across the field of view as indicated by Figure 3.
Table 1. Characteristics of the four IFU channels
MRS spatial resolution and dithering
The four channels of the MRS each cover an overlapping but distinct region of the JWST focal plane (see details on the MRS field of view, coordinate systems, and pointing origin). The spatial point spread function (PSF) seen by the imager slicers is undersampled by design, as is the spectral line spread function (LSF) sampled by the detector pixels. Full sampling in both spatial and spectral dimensions therefore requires that objects be observed in at least two (and ideally four) dither positions that include an offset in both the along-slice and across-slice directions. Assuming that such dithered observations are obtained, the MRS is nearly diffraction limited longward of 8 μm (see MIRI MRS Dithering, Figure 1).
A variety of different dither patterns are offered that optimize observations for a variety of different considerations:
MRS exposure time
Main article: MIRI Detector Readout Overview
MIRI MRS exposure times are not specified directly. Rather, the detectors are read using up-the-ramp sampling tied to specific timing readout patterns. Two detector readout patterns are supported for MRS spectroscopy:
The JWST Exposure Time Calculator (ETC) should be used to determine which mode is best for a given set of observations, and how many frames and integrations are required in order to reach the target depth.
A few additional considerations should be kept in mind:
All MRS articles
JWST Integral Field Spectroscopy provides an introduction to integral field spectroscopy with JWST
MIRI Medium Resolution Spectroscopy provides a main overview of the MIRI MRS (this page)
MIRI MRS APT Guide: step-by-step instructions on how to fill out APT
MIRI MRS Recommended Strategies: frequently asked questions on best practices for specifying observations
MIRI MRS Dedicated Sky Observations: information on MRS dedicated background exposures
MIRI MRS Dithering: detailed information on MRS dithering strategies
MIRI MRS Field: overview of the MRS field of view, coordinate systems, and pointing origins
MIRI MRS Hardware: overview of the MRS imager slicer hardware
MIRI MRS Mosaics: information on MRS mosaicing strategies
MIRI MRS Simultaneous Imaging: information on using the MIRI Imager during MRS observations
MIRI MRS Target Acquisition: target acquisition procedures for the MRS