Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Content Block
overflowauto
meta-propertiestrue
nameSummary
id277319516
classpdf-full

The JWST NIRISS optical path consists of a pick-off mirror, a collimator, pupil and filter wheels, and a camera that focuses the light onto the detector.

Content Block
overflowauto
nameContent
id277805920
classpdf-full

Introduction

Parent page: NIRISS Instrumentation

NIRISS has an all-reflective optical design that consists of:

  • a pick-off mirror (POM),
  • a three-mirror collimator assembly,
  • a dual pupil/filter wheel assembly,
  • a three-mirror camera assembly, and
  • a single Hawaii 2RG detector


Content Block
overflowauto
nameContent
id277805920
classpdf-full

NIRISS optical assembly

The optical path is illustrated schematically in Figure 1. The optical assembly is attached to an aluminum optical bench, which is shared with the the Fine Guidance Sensor. Three kinematic mounts, made of titanium, attach the optical assembly to the structure of the Integrated Science Instrument Module (ISIM).

 

NIRISS optical assembly

Figure container
Figure title

Figure 1. Optical path of NIRISS

Optical layout of NIRISS (schematic)

Figure caption

A schematic plot showing the optical layout of NIRISS. Source: Honeywell.

Figure container
Figure title

Figure 2. Solid body rendering of NIRISS

Solid-body rendering of NIRISS

Figure caption

Solid body rendering of NIRISS. Key components of the optical path are labelled. The kinematic mounts fasten NIRISS to the ISIM structure. Source: Honeywell.

Figure container
Figure title

Figure 3. NIRISS flight hardware

NIRISS uncovered

Figure caption

A photograph of the NIRISS flight hardware, at the Goddard Space Flight Center in December 2014, take between the second and third cryovacuum test campaigns. Compare it with Figure 2, where key components are identified. The path between the POM (which is not visible in this image) and the collimator three-mirror assembly (TMA) is shielded by internal baffling. Source: Honeywell.



Pick-off mirror

The pick-off mirror (POM) is a flat mirror composed of an aluminum substrate coated with nickel plating. Light from the fine steering mirror of the JWST Optical Telescope Element (OTE) is focused onto the NIRISS POM and directed into the instrument. 

The POM is mounted on a movable stage that serves as the course focus mechanism (CFM) for NIRISS.

It has four coronagraphic occulters engraved in its surface. These deep, cone-shaped holes in the nickel overcoat are remnants of the original tunable filter imager (TFI) configuration of the instrument. Although NIRISS does not have a coronagraphic mode, these occulters will nevertheless leave their imprint on all images of externally-illuminated sources. When projected onto the detector, the occulters appear as circular spots with diameters of 0.58", 0.75", 1.5", and 2.0" (approximately 9, 11. 23. and 31 pixels, respectively), with positions that depend slightly on the focus.

 



Detector

The NIRISS detector is a single Hawaii 2RG sensor chip array with 2048 × 2048 pixels. It provides a field of view of 2.2" × 2.2" with a plate scale of approximately 0.065 "/pixel.

 

 





References

JWST technical documents

restrict-
Content Block
overflowauto
nameReferences
id281944791
classpdf-hide


confluenceauthors
content
groups
-
Panel

Block has been set to pdf-hide. Contact Shireen if you enter references

content-block
overflowauto
nameIcon
id278719485
classpdf-hide

Multiexcerpt include
MultiExcerptNameNIRISS icon and name
PageWithExcerptMR:NIRISS icon and name

...