JWST Observatory Coordinate System and Field of Regard
The JWST Observatory, as a whole, has a reference coordinate system used by operations to define the pointing of the telescope within the field of regard (FOR), including defining the continuous viewing zone (CVZ) available to the observatory.
The JWST Observatory V1, V2, V3 coordinate system is primarily used in operations, but there are a number of instances where users may want to understand the orientation of the focal plane or one of the science instruments in the context of the observatory's pointing. Also, there are a number of places, for example in various APT diagnostic plots, where the V axes are used to provide an instrument-independent reference frame.
This article provides information to link the V axes definitions to other JWST software and systems. Furthermore, the JWST field of regard (FOR) defines the instantaneous region of the sky that is available for safe JWST pointing of the telescope boresight, so users should understand the JWST V1 axis in particular (the telescope boresight) in the context of the FOR—this is also described in the article.
JWST Field of Regard (FOR)
The JWST FOR is defined by the allowed range of boresight pointing angles for the observatory relative to the sun line, which must remain in the range 85° to 135° at all times to keep the telescope behind the sun shield. Thus, the FOR is a large torus on the sky that moves roughly 1° per day in ecliptic longitude, following the telescope in its path around the sun. Figure 1 shows a schematic of the FOR.
JWST Observatory coordinate system
The observatory V axes are defined with respect to the telescope, as shown in Figure 2. +V1 is the boresight of the telescope, +V3 points away from the sunshield, and +V2 is orthogonal to both of these, forming the "thumb" of a right-handed coordinate system. In the context of Figure 2, the V2 axis is pointing toward the reader (out of the screen).
Continuous viewing zone (CVZ)
Because JWST operates in an ecliptic coordinate framework, there are two small continuous viewing zones (CVZs) centered at each of the ecliptic poles (see Figure 6). The 85° solar exclusion zone then determines the radius of the allowed CVZs to be essentially 5°, although any observation approaching the 85° limit will have additional limitations.
In standard J2000 equatorial coordinates, the CVZs are centered at the following coordinates:
N-CVZ: 18h00m00.00000s +66°33'38.5520" (or 270.00000000° +66.56070889°)
S-CVZ: 6h00m00.00000s −66°33'38.5520" (or 90.00000000° −66.56070889°)
The S-CVZ encompasses a portion of the Large Magellanic Cloud.
Schlegel, D. J., Finkbeiner, D. P., Davis, M. 1998, ApJ, 500, 525
Maps of Dust Infrared Emission for Use in Estimation of Reddening and Cosmic Microwave Background Radiation Foregrounds