The JWST Observatory, as a whole, has a reference coordinate system used by operations to define the pointing of the telescope within the field of regard (FOR), including defining the continuous viewing zone (CVZ) available to the observatory.
Parent page: JWST Observatory
The JWST Observatory V1, V2, V3 coordinate system is primarily used in operations, but there are a number of instances where users may want to understand the orientation of the focal plane or one of the science instruments in the context of the observatory's pointing. Also, there are a number of places, for example in various APT diagnostic plots, where the V axes are used to provide an instrument-independent reference frame.
This article provides information to link the V axes definitions to other JWST software and systems. Furthermore, the JWST field of regard (FOR) defines the instantaneous region of the sky that is available for safe JWST pointing of the telescope boresight, so users should understand the JWST V1 axis in particular (the telescope boresight) in the context of the FOR—this is also described in the article.
JWST Field of Regard (FOR)
The JWST FOR is defined by the allowed range of boresight pointing angles for the observatory relative to the sun line, which must remain in the range 85° to 135° at all times to keep the telescope behind the sun shield. Thus, the FOR is a large torus on the sky that moves roughly 1° per day in ecliptic longitude, following the telescope in its path around the sun. Figure 1 shows a schematic of the FOR.
The JWST Observatory coordinate system
The observatory V axes are defined with respect to the telescope, as shown in Figure 2. +V1 is the boresight of the telescope, +V3 points away from the sunshield, and +V2 is orthogonal to both of these, forming the "thumb" of a right-handed coordinate system. In the context of Figure 2, the V2 axis is pointing toward the reader (out of the screen).
In Figure 3, the JWST coordinate system is shown in the context of the FOR. If the observatory is pointed at 90° solar elongation, the +V3 axis points toward the anti-sun, but as the boresight points elsewhere in the FOR, V3 moves away from the anti-sun direction. In the view shown in Figure 3, the +V2 axis is pointing into the screen.
Figure 4 shows another view to highlight the restrictions on instantaneous roll about the boresight (+V1 axis). The amount the observatory can roll about the V1 axis is very limited due to the requirement to keep the telescope completely behind the sun shield at all times. The ±5° value shown in the figure is only approximate as the amount of off-axis roll allowed is actually a function of the V1 solar elongation (ranging from approximately ±3° to ±7° as V1 moves from 85° to 135° solar elongation). The limitation on roll comes into play for the so-called "roll dithers" used in many coronagraphic programs. (See the JWST Dithering Overview article for more information.)
Figure 5 shows the connection between the V axes and the JWST focal plane. The V3 axis is the primary observatory reference axis used in APT and in operations to connect the individual instrument reference axes (blue arrows) in the planning and scheduling system to the celestial sphere. This is especially important for any observations where the positioning of the instrument fields of view on the sky is important. See the JWST Position Angles, Ranges, and Offsets article for more information.
Continuous viewing zone (CVZ)
Because JWST operates in an ecliptic coordinate framework, there are two small continuous viewing zones (CVZs) centered at each of the ecliptic poles (see Figure 6). The 85° solar exclusion zone then determines the radius of the allowed CVZs to be essentially 5°, although any observation approaching the 85° limit will have additional limitations.
In standard J2000 equatorial coordinates, the CVZs are centered at the following coordinates:
N-CVZ: 18h00m00.00000s +66°33'38.5520" (or 270.00000000° +66.56070889°)
S-CVZ: 6h00m00.00000s −66°33'38.5520" (or 90.00000000° −66.56070889°)
The S-CVZ encompasses a portion of the Large Magellanic Cloud.
Schlegel, D. J., Finkbeiner, D. P., Davis, M. 1998, ApJ, 500, 525
Maps of Dust Infrared Emission for Use in Estimation of Reddening and Cosmic Microwave Background Radiation Foregrounds